PQWTM200
Depth 200 Meters
Frequency Single, Triple, 36frequency
Measurement data unit electric field component of different frequencies of the earth electromagnetic field ΔVs (mV)
Channel 6
System PQWT
Units of Measurement △Vs(mV)
Measurement Range 0mV－1500mV
Display LED indicator
A/D conversion 8-bit 1Msps
Input impedance ≥10MΩ
Relative humidity ≤85%
Power consumption about 1W
Working environment temperature -20°C ~ +50°C
Power Supply Battery Model #18650; 3000mAh Rechargeable lithium battery
PQWT-M200 mobile water detector is based on the Earth’s electromagnetic field as the field source, based on the difference in the conductivity of different underground geological structures, and by studying the variation law of the electric field components at different frequencies to study the geological structure and changes, to find groundwater resources by scientific method.
Changes in geological structure are displayed in real-time through multiple curves. Automatic form mapping geological profile by one key operate easily, get rid of complicated computer graphics. The site can quickly understand the geological structure through the automatic mapping curve and profile, and analyze specific information such as aquifers, fractures, faults, and caves.
The instrument is widely used in the rapid analysis of geological structure changes in different terrains such as plains, hills, mountains, plateaus, and basins to determine well locations, aquifers, and aquifer depth.
Related Products
Technical Sheet
1. Imaging Chip: 1/3” color CCD, sensitivity 0.1Lux.
2. Display: LCD, 12 inches, resolution 1024*768.
3. Lens: Manually fine-tune the focus; the lens is 360 degrees horizontally, tilted 180 degrees to rotate, freely controlled and can stay in any position.
4. Illumination Unit: front LED patch lamp beads, the brightness of the light source is adjustable in 8 levels.
Measurement Depth: 300M, 400M, 500M, 600M, 800M, 1000M
5. Storage Unit: U Disk.
6. Probe: Panorama/ rotation can be replaced at will, 40-120mm.
7. Working Voltage: AC 220V50Hz.
8. The tensile strength of the cable is 250kg.
9. The maximum pressure of the probe is not less than 15Mpa.
Controller Unit
Screen 12inch
Storage 32GB (SD card)
Keyboard Yes
Rotary 360 Degree rotary
Focus Adjustable
Winch Unit
Electric AC 220V
Cable core 6-core
Wheel type 0-500m
Skid type 501-1000m
Probe
Diameter 75mm
Rotary Yes
Focus Yes
Light Adjustable (+1 and -1)
Centralizer Yes
View angle Down and Side
Accurate Depth Measurement: Provides quick and precise readings of water depth with a standard resolution of 0.5 mm.
Audible Signal: Emits a clear tone when the probe contacts water, making detection easy even in noisy environments.
Durable Tape: Uses a flat, high-tensile, non-stretch tape with clear depth markings for long-term reliability.
Battery Operated: Lightweight and portable, ideal for field use without the need for external power.
Multiple Length Options: Available in lengths ranging from 100 meters to 1000 meters, suitable for shallow and deep wells
• Wideband Detection (DC–10 kHz): Delivers full-spectrum coverage for shallow and deep subsurface structures.
• High-Precision 32-bit ADC: Achieves crystal-clear signal fidelity with ultra-low noise and distortion.
• Multi-Mode Integration: Seamlessly supports MT, AMT, and CSAMT modes for flexible exploration needs.
• Real-Time Geological Imaging: View resistivity profiles, phase curves, and apparent resistivity instantly on-site.
• Rugged, Field-Ready Design: IP67-rated enclosure withstands harsh weather, dust, and impact.
• Ultra-Low Power Consumption (< 5 W): Ideal for extended field campaigns with minimal energy use.
• Precise Timing Synchronization (≤ 30 ns): Dual GPS and thermostatic crystal clock ensure timing integrity in all conditions.
• High Data Capacity & Fast Transfer: Built-in 64 GB storage with USB, WiFi, and Ethernet connectivity.
Depth 100 / 150 / 300 Meters
Frequency Single, Triple, 36/40/56frequency
Channel 8
System PQWT
LCD Industrial 7-inch HD touch screen
Units of Measurement △Vs(mV)
Measurement Range 0mV－2000mV
Stand-by Time 8-10 hours
Power Supply Battery Model #26650; 3.7V 4000mAh Rechargeable lithium battery
Depth 100m/150m/300m
Measuring time 6-8min
Measurement data unit electric field component of different frequencies of the earth electromagnetic field ΔVs (mV)
Maximum Channels: 18
Display screen unit: 10.1-inch HD touch screen (1024 *600)
A/D conversion: 16-bits 1Msps
Minimum resolution: 0.001mv
Point selection: 1-18 points optional
Power consumption: about 9W
Working environment temperature: -20°C ~ +50°C
Controller : 32-bit high speed CPU
Standby time: 8h
Cable: 2.5m point pitch, 10m line pitch 54.7m in total length
Electrode: Each comes standard with 22pcs
Host Weight: 1.95kg
• 8-channel simultaneous measurement for rapid data acquisition
• Wi-Fi enabled for seamless remote control and data transfer
• Expandable electrode capacity – supports up to 112 electrodes with 5m spacing
• Marine and land survey compatibility, ideal for complex terrains and aquatic environments
• Integrated GPS and EarthImager™ software for precise positioning and advanced inversion modeling
• Rugged field-ready design with heavy-duty transport case, stainless steel electrodes, and robust cabling
